Instrument - Veterinär

1271-325

Autoklaverbar instrumentlåda 230x155mm Hålduk i bomull 600x550mm / hål 35x100mm Skalpellskaft nr.3×1, Nålförare Olsen-Hegar Duklämma Jones x4, Allis peang x2, Artärpeang böjd Spencer Wells x4, Kirurgisk pincett 14cm 1×2, Mayo sax rak 14cm Hysterektomipeang böjd 20cm x2

Winberg Bistouri Kniv 17cm

Box till skruv

Max 6mm

Favorita är en nätansluten kraftfull, tyst, tillförlitlig och robust klippmaskin. Universalmotor med slitstark metall , ger genomgående gott klippresultat.

Färg: röd, Vikt: ca 650gr, Sladdlängd: 4 meter

Benhållartång 001211V

TTA rapid, framtagen med hjälp utav 3D teknik Det strukturella ytterhöljet ger extra styrka och har integrerade skruvhål för en mycket stel primär fixering

TPLO blad

TPLO jig max 2,4 stift

laparoscopi

Delade handtag

Cerclage spännare

Jacobs Chuck

Benhållartång 15cm

Synthes batterier som kan laddas i denna är Battery Power line, Battery Power Line II, Trauma Recon System, Colibri / Small Battery Drive, Colibri / Small Battery Drive II , automatisk laddning och check.

Trinkle Quick Coupling modified for Medullary reaming

Trinkle Quick Coupling for Medullary reaming

Screw Attachment (05.001.251)has a low speed and a high torque and is therefore more suitable. Screws with a large diamemay not be able to be inserted with the AO/ASIF Quick Coupling as the torque may not suffice.

Kirschner Wires of any length with a diameter of 0.6–3.2 mm can be used with the Quick Coupling for Kirschner Wires.

For DHS/DCS Triple Reamers; can also be used to open the medullary cavity with most of the Synthes nailing systems.

Oscillating Saw Attachment II (Crescentic Technique) (532.023). The Oscillating Saw Attachment II is essentially designed for use with semicircular saw blades (for example 03.000.313S) guided by a 1.6 mm Kirschner Wire. It can also be used with saw blades with a shaft extension (for example 03.000.340S) for reaching difficult-to-access sites (such as intraoral).

Oscillating Saw Attachment (532.021). The attachment can be locked in eight different positions (45° steps) when coupled

Mini Quick Coupling (532.011) For tools with a Mini Quick coupling shaft.

Large Oscillating Saw Attachment (532.026). The Large Oscillating Saw Attachment is a specially designed saw attachment for performing a crescentic saw cut, e.g. while performing a Tibial Plateau Leveling Osteotomy in the canine proximal tibia. The attachment is approved for use in both humans and animals

J-Latch Coupling (532.012) For tools with a Mini Quick or J-Latch coupling shaft.

Hudson Quick Coupling (532.018) The Quick Couplings for Medullary Reaming enable the use of flexible shafts with the appropriate coupling geometry. Reverse motion, which can damage the flexible shafts, is prevented by a special mechanical system.

Colibri II Universal and powerful battery system for a variety of applications The Colibri II is designed for the use in traumatology and orthopedic surgery of the skeleton, i.e. drilling, reaming or cutting bone.