Filter Visar alla 18 produkter
Pris
Sortera efter
Klicka här för att filtrera
Pris
Sortera efter

Fatfot, 1 kg

Heavy base for holding rods of up to 13 mm in diameter. Made of powder coated cast iron. High : 55 mm. Diam.: 60 mm

790 kr Excluding VAT Leverans: 2-6 arbetsdagar

DIN-B burett med Schellbach-streck, 10 m

Burette tube for measuring small amounts of liquid with Schellbach stripe and tap at the side with standard ground (NS) glass connector and cock plug. Volume:         10 ml Scale divisions:       0.02 ml Error limits:    Class B Dimensions 90 x 10 x 0.4 cm

790 kr Excluding VAT Leverans: 2-6 arbetsdagar

Bordsklämma

Powder-coated aluminium alloy, 350 g, for vertically attaching rods of up to 13 mm to tabletops.

690 kr Excluding VAT Leverans: 2-6 arbetsdagar

HF-sladd, BNC/4 mm-kontakt

Shielded patch cord equipped with a BNC plug at one end and a 4-mm-plug at the other end. Specifications: Impedance: 50 Ohm Length: 1 m Dimensions 12 x 4 x 4 cm

890 kr Excluding VAT Leverans: 2-6 arbetsdagar

Fårfot, 500 g

Denna produkt är tillverkad i grått gjutjärn och basen används till att montera stående stavar med en diameter på upp till 12 mm och rektangulära plattor med en tjocklek på 10 mm eller 12 mm. Höjd: 47 mm Vikt: 0,5 mm Diameter: 54 mm Kaliber: 12 mm Ø Mått: 8,5 x 7,5 x 7,5 cm

890 kr Excluding VAT Leverans: 2-6 arbetsdagar

Stativstativ 150 mm

Adjustable duplex tripod base, extremely stable, for holding two rods of up to 16 mm in diameter. Distance between rods 95 mm. Leg length: 150 mm Mass: 1450 g

890 kr Excluding VAT Leverans: 2-6 arbetsdagar

Barrel Foot 900 g

Made of grey cast iron, this base is used to mount stand rods with a diameter of up to 12 mm and rectangular plates with a thickness of 12 mm. Height: 56 mmWeight: 0.9 kgDiameter: 64 mmBore: 12 mm Ø

890 kr Excluding VAT Leverans: 2-6 arbetsdagar

Hållare för instickskomponenter

Holding rod with 4-mm connector sockets to accommodate and connect components with two plugs matching a 19-mm or 50-mm grid or conductor loops for verifying the Biot-Savart law. Suitable for both 4-mm laminated plugs as well as 4-mm safety plugs. Max. continuous current:  25 A Diameter of rod:       10 mm Dimensions: 110x20x135 mm3 approx. Weight:          […]

890 kr Excluding VAT Leverans: 2-6 arbetsdagar

Tripod Ställ 185 mm

Adjustable duplex tripod base, extremely stable, for holding two rods of up to 16 mm in diameter. Distance between rods 135 mm. Leg length: 185 mm Mass: 1850 g

990 kr Excluding VAT Leverans: 2-6 arbetsdagar

Stativfot, A-formad 195 mm

Adjustable duplex tripod base, extremely stable, for holding two rods of 4 up to 15 mm in diameter. Limb length : 195 mm Weight: 1.4 kg

1 190 kr Excluding VAT Leverans: 2-6 arbetsdagar

Experimenteringsledningar för elektronrörsexperiment.

Seventeen maximum-quality patch cords with 4-mm-connectors for all cabling between tubes, power supplies, display units and coils. Wire cross-section: 1 mm² Continuous current: max. 19 A Plug and jack: 4 mm Ø (nickel-plated) Quantity: 3 Length: 75 cm Color: red Connection: jack/safety-plug Quantity: 4 Length: 75 cm Color: blue Connection: plug/plug Quantity: 2 Length: 75 […]

1 190 kr Excluding VAT Leverans: 2-6 arbetsdagar

Laboratoriebord III

Height adjustable table with continuously variable extension mechanism for raising experiment equipment. May be fixed in place via wing nuts. Maximum load: 50 kg Tabletop: 160×130 mm² Height of table: 60 – 250 mm Weight: 1.2 kg

1 290 kr Excluding VAT Leverans: 2-6 arbetsdagar

Laboratorieknapp II

Height adjustable table with continuously variable extension mechanism for raising experiment equipment. May be fixed in place via wing nuts. Maximum load: 40 kg Tabletop: 200×200 mm² Height of table: 70 – 260 mm Weight: 2.3 kg

1 490 kr Excluding VAT Leverans: 2-6 arbetsdagar

Stativfot, A-formad 270 mm

Adjustable duplex tripod base, extremely stable, for holding two rods of 4 up to 15 mm in diameter. Limb length : 270 mm Weight: 2.6 kg

1 490 kr Excluding VAT Leverans: 2-6 arbetsdagar

Laboratoriebord I

Height adjustable table with continuously variable extension mechanism for raising experiment equipment. May be fixed in place via wing nuts. Maximum load: 30 kg Tabletop: 320×220 mm² Height of table: 65 – 250 mm Weight: 2.6 kg

1 490 kr Excluding VAT Leverans: 2-6 arbetsdagar

Stativutrustning “Mekaniska svängningar”

Stand equipment for easy, understandable and stable assemblies, e.g. for investigating mechanical oscillations and waves using the sensors from Sensors “Mechanical Oscillations” (1012850 or 1012851). Including SW base plate as non-tilting base to accommodate the stand rods, two double clamps and SW tie bar. The SW tie bar serves as multi-function holder for fitting between […]

1 790 kr Excluding VAT Leverans: 2-6 arbetsdagar

Stativ med H-formad bas

Provides a firm base for large and extensive structures, with six clamping positions for stand rods up to 12 mm in diameter. Max. stand area:                  550×280 mm2 Dimensions 55 x 28 cm

1 890 kr Excluding VAT Leverans: 2-6 arbetsdagar

Säkerheter

Set of fuses, including 105 fast-acting fuses of a high switching capacity and 135 slow-acting fuses of a low switching capacity. Stored in a box. Dimensions: 5 mm diam. x 20 mm Rated voltage: 250 V Type SP: Material: Glass tube Time response: Fast Switching capacity: 1000 A @ 250 V Assortment: 1 A (15 […]

2 090 kr Excluding VAT Leverans: 2-6 arbetsdagar