Filter Visar alla 27 produkter
Pris
Sortera efter
Klicka här för att filtrera
Pris
Sortera efter

Resistans Dekad 10 Ohm

Resistance decades which can be mechanically connected to one another, e.g. in order to assemble a Wheatstone bridge. With color-coded safety sockets and control knob for setting measurement resistances in 10 steps. Includes 25-cm safety patch cord. Connections: via 4-mm-safety sockets Dimensions: 72 mm x 72 mm x 90 mm Weight: 220 g Measurement range: […]

2 390 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Motstånd Decade 1 Ohm

Resistance decades which can be mechanically connected to one another, e.g. in order to assemble a Wheatstone bridge. With color-coded safety sockets and control knob for setting measurement resistances in 10 steps. Includes 25-cm safety patch cord. Connections: via 4-mm-safety sockets Dimensions: 72 mm x 72 mm x 90 mm Weight: 220 g Measurement range: […]

2 590 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Precisionsresistor 10 ohm

In plastic housing with 4-mm safety plugs. Specifications: Dimensions: 122x70x50 mm Resistance: 10 Ω Tolerance: 1% Load rating: 4 W

690 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Precisionsresistor 1 ohm

In plastic housing with 4-mm safety plugs. Specifications: Dimensions: 122x70x50 mm Resistance: 1 Ω Tolerance: 1% Load rating: 4 W

690 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Kondensator 2200 µF

Capacitor in plastic housing with 4 mm safety plugs. Capacitance: 2200 μF Tolerance: 20% Maximum permissible voltage: 40 V Dimensions: approx. 122x70x50 mm³

690 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Okända Resistorer I 3B Låda

Four unknown resistors which can be connected separately in two series circuits. Inside a safe box with sockets for safety experiment leads. Printed with circuit symbols. Maximum voltage: 6 V Maximum current: 200 mA Dimensions: 135x85x40 mm³

690 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Stavklämma med isolator

Clamp for the insulated securing of electrical components with 4 mm connectors. A PVC isolator is used to isolate sections from each other. Upper section features two 4 mm cross bore holes and one 6 mm hole with clamping screw. Lower section with two 4 mm cross holes. Total length: approx. 205 mm Stem diameter: […]

690 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Hållare för komponenter

Holder on an acrylic base with two crocodile clips for connecting loose resistors and other electronic components or samples from the “Conductors and Insulators” set. Sockets for 4-mm safety plugs.

790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Enda omkopplare på akrylbas

Switch mounted on a transparent acrylic base for the alternate opening and closing of a circuit. Sockets for 4 mm safety plugs.

790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Växelströmbrytare på akrylbas

Switch mounted on a transparent acrylic base for the alternate opening and closing of two electric circuits. Sockets for 4 mm safety plugs.

790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Volta’s Pile on 3B Box

Replica of Alessandro Volta’s apparatus consisting of series-connected galvanic cells to make up a source of electricity. Zinc and copper plates stacked in alternation on top of each other are separated in each case by a piece of felt soaked in an electrolyte (salt water or acid). The electrolyte makes it possible for electricity to […]

890 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Kontaktställ med kontaktuttag med terminaluttag

Connection rod on insulated base with three 4 mm cross holes and one axial 4 mm bore hole used to secure components with 4 mm connectors or to plug in 4 mm cables. At the top end spring-loaded terminal socket used as a wire clamp. Height: approx. 130 mm Shaft: approx. 105×10 mm² Base: approx. […]

890 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Dubbelpolig dubbelströmbrytare

Double-pole double throw (DPDT) change-over switch in a robust casing with high dielectric strength. Connection is made via 4-mm safety sockets. Dimensions: 112 x 62 x 45 mm approx. Weight: 95 g approx.

890 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Kapacitansdekad

Capacitance decade in impact-resistant plastic housing. This series incorporates mechanically stable components, a slide switch for setting measurement ranges and 4-mm safety sockets to ensure that all connections are safe. Measuring range: 100 pF – 11.11 µF Increment: 100 pF Accuracy: 5% Number of decades: 5 Limiting values: max. 50 V DC Dimensions: 140x190x80 mm³ […]

1 290 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Induktansdekadbox – hög noggrannhet, med skjutbrytare

Variable inductance decade in impact-resistant plastic housing. This series incorporates mechanically stable components, a slide switch for setting measurement ranges and 4-mm safety sockets to ensure that all connections are safe. Designation: Inductance Decade Measuring range: 10 µH – 111.1 mH Increment: 10 µH Accuracy: 5% Number of decades: 4 Limiting values: max. 100 mA […]

1 290 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 33 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

1 790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 1000 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

1 790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 3300 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

1 790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 330 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

1 790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 100 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

1 790 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 3.3 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

2 090 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 10 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

2 090 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Resistans decad, 1 Ohm – 10 kOhm

Four resistance decades in a single housing, can be used individually or in combination, e.g. for setting up a Wheatstone bridge. Can be set using control knob, with decade scale. Output: via 4 mm safety sockets Max. current: 700 mA (1 Ω − 10 Ω), 200 mA (10 Ω − 100 Ω), 70 mA (100 […]

2 190 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Motstånd Decade 100 Ohm

Resistance decades which can be mechanically connected to one another, e.g. in order to assemble a Wheatstone bridge. With color-coded safety sockets and control knob for setting measurement resistances in 10 steps. Includes 25-cm safety patch cord. Connections: via 4-mm-safety sockets Dimensions: 72 mm x 72 mm x 90 mm Weight: 220 g Measurement range: […]

2 590 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Rheostat 1 Ohm

Used during experiments in extra-low and low voltage circuits, these heavy-duty variable resistors have shockproof housings and built-in ground sockets. Use them as a continuously variable series resistor, for setting power levels, as fixed resistor or as voltage divider. Resistance tolerance: 10% from nominal value Max. permissible power: 320 W (continuous operation), 640 W (max. […]

2 990 kr Excluding VAT
Leverans: 4-12 arbetsdagar

Monteringssats “Ringklocka, relä och bimetallisk strömbrytare”

Assembly Kit “Bell, Relay and Bimetallic Switch ” Equipment kit comprising materials to assemble electromagnetic switches and bimetallic switches. Base plate in mm (L x W x H): 200 x 140 x 40 Total weight of set: approx. 1.6 kg Scope of supply: Stand plate with 3 clamps Bell, 70 mm in diameter Contact rod […]

3 490 kr Excluding VAT
Leverans: 4-12 arbetsdagar